35 M³ Capacity Cement Trailer Technical Properties;
Produced by gas welding machines from high resistance steel ST52 meterials as *I* section in resistance calculation excessive loading has been considered with robotic welding machine.
Produced with wrought iron (42 cr Mo4). Thats high resistance to tension and breaking off compliance with 2’’ SAE/DIN norms and provides easy replacement posibility with screw connections.
3 X 14000 kg carriying capacity. Turkish Mark automatic brake adjustment lever and compliance with european standards. Off drum brake systems.
Designed according into the european standards are used on equipped with automatic brake adjustment brake chambers (30 cylinder), Brake Disk (394x210 mm) axle brakes system. There are two pieces of replecable protective brake sockets.
According to costumer request “Lider” brand mechanical or air suspension system.
They are “Lider” brand with double revolutions mechanic pillars with 24 tons carriying capacity.
Wheel and Rim:
385/65 R22,5 tyres 6 Units ( Pirelli Or Goodyear Brand) - 11,75 x 22,5 rim 6 Units.
Tank volume is 35 M³ capacity.
1 unit air compressor (7200 Lt / Minute (Electrical Motor or Diesel Motor)
Unloding Time: 22 Minute
Length: 11000 mm
Width: 2550 mm
Working Pressure: 2 BAR
Test pressure: 2,6 BAR
The Body is in ‘’V’’ type
Silobas body is made of 4 mm thickness.
3 heads, 8m3/minute, with flow rate, piston, electric motor.
The tank is filled with air in 2 bars. It is discharged from 4” ball valve at the ground aith the aid of vibration hoses on the ground.
1.5 m3/min (in the sufficient air pressure).
It Limits the pressure inside of the tank with 2 bars.
Trailer clean before painting and repair with paste for smooth face. Then prime paint and double last paint regarding customer reguest in Paint Oven.
At side 5 unit lamps.
60, 70, 80 Label, at rear park lamps, plate lamp triangle reflector.
2 X 7 pim electric sockets.
2 pieces single covered, manhole resistant to test pressure.
1 piece air pressure monometer.
Imported hose system having internal discharging channel that provides fluidity.
1 piece safety valve adjusted to 2.5 bar.
1 piece ball jet air valve that accelerates discharging.
1 piece tool kit box (at the body).
1 piece nonskid ground walking platform.
1 piece stair from rear existing.
2 pieces PVC carrier for discharging hoses.
Plastic mudguard covering rear axle Group.
1 piece tool kit box made of sheet.
1 piece discharge valve box made of sheet.
Control Panel (Check – pass, air meter, ramp lever).
Plastic water tank.
Roller or basket spare tire carrier.
Chock and chock place.
|. . .|
The above features are standards. The features can change according to customer’s request.