Products

60 M³

Paylaş

60 M³ Capacity Cement Trailer Technical Properties;

Chassis:


Produced by gas welding machines from high resistance steel ST52 meterials as *I* section in resistance calculation excessive loading has been considered with robotic welding machine.


King Pin:


Produced with wrought iron (42 cr Mo4). Thats high resistance to tension and breaking off compliance with 2’’ SAE/DIN norms and provides easy replacement posibility with screw connections.


Axles:


3 X 20000 kg carriying capacity. Turkish Mark automatic brake adjustment lever and compliance with european standards. Off drum brake systems.


Brake System:


Designed according into the european standards are used on equipped with automatic brake adjustment brake chambers (30 cylinder), Brake Disk (394x210 mm) axle brakes system. There are two pieces of replecable protective brake sockets. 

Rear Axles 30x30 Service emergency bellows.


Mechanical/Suspension Systems:              



According to costumer request “Lider” brand mechanical suspension system. 


Counterfort:


They are “Lider” brand with double revolutions mechanic pillars with 24 tons carriying capacity.


Wheel and Rim:


12 R22,5 tyres 12Units ( Pirelli Or Goodyear Brand) - 12R  x 22,5 rim 12 Units.


Tank Volume:


Tank volume is 60 M³ capacity.


Tank Meterial:


1 unit air compressor  (10200 Lt / Minute (Deutz Diesel Engine)

Unloding Time:45 Minute

Length: 13000 mm

Width: 2550 mm

Working Pressure: 2 BAR

Test pressure: 2,6 BAR

The Body is in ‘’V’’ type

Silobas body is made of 6 mm thickness. 


Compressor

-3 heads, 8m3/minute, with flow rate, piston, electric motor.


Tank Equipment:


The tank is filled with air in 2 bars. It is discharged from 4” ball valve at the ground aith the aid of vibration hoses on the ground.

Discharcing System:

1.5 m3/min (in the sufficient air pressure).

Safety Valve:

It Limits the pressure inside of the tank with 2 bars.


Paint:


Trailer clean before painting and repair with paste for smooth face. Then prime paint and double last paint regarding customer reguest in Paint Oven.


Electrical Equipment:


At side 5 unit lamps.

60, 70, 80 Label, at rear park lamps, plate lamp triangle reflector.

2 X 7 pim electric sockets.


Accosseries:


2 pieces single covered, manhole resistant to test pressure.

1 piece air pressure monometer.

Imported hose system having internal discharging channel that provides fluidity.

1 piece safety valve adjusted to 2.5 bar.

1 piece ball jet air valve that accelerates discharging.

1 piece tool kit box (at the body).

1 piece nonskid ground walking platform.

1 piece stair from rear existing.

2 pieces PVC carrier for discharging hoses.

Plastic mudguard covering rear axle Group.

1 piece tool kit box made of sheet.

1 piece discharge valve box made of sheet.

Control Panel (Check – pass, air meter, ramp lever).

Plastic water tank.

Roller or basket spare tire carrier.

Chock and chock place.


                                                             .                .                              .

The above features are standards. The features can change according to customer’s request.