Products

Float Box

Paylaş


Flatbed Semi Trailer With Side Walls Technical Specifications  ;


Chassis:


Produced by gas welding machines from high resistance steel ST52 meterials as *I* section in resistance calculation excessive loading has been considered with robotic welding machine.


King Pin:


Produced with wrought iron (42 cr Mo4). Thats high resistance to tension and breaking off compliance with 2’’ SAE/DIN norms and provides easy replacement posibility with screw connections.


Axles:


Produced as 3*12 tons capacity ,automatic braje adjustment lever and compliance with european standards.


Front Axle Lift :


Controlled from axle lifting system into the cabin.

Brake System:


Designed according into the european standards products are used on equipped with automatic brake adjustment brake chambers (30 cylinder)

Brake linings (420x200 mm) axle brakes system.There are two pieces of replecable protective brake sockets. (WABCO ABS) systems. 


Air Suspension Systems:                     



Consist of height adjusting system with lowering and raising parobolik Z spring and shock absorber elements limining the accesive axle movementaxle movement.


Counterfort:


They are “Lider” brand with double revolutions mechanic pillars with 24 tons carriying capacity.


Wheel and Rim:


385/65 R 22,5  6 units. Goodyear or Pirelli brand


Floor Covering:


In the shape of  3*4 mm diamond type wooden gril.


Side Walls and Floor:


Floor is checkered steel plate or hardened wood. Side walls aluminum or steel walls. Optionally can be design for pipe trasnport.

Paint:


Trailer clean before painting and repair with paste for smooth face. Then prime paint and double last paint regarding customer reguest in Paint Oven.


Electrical Equipment:


At side 5 unit lamps.

60, 70, 80 Label, at rear park lamps, plate lamp triangle reflector.

2 X 7 pim electric sockets.


Accosseries:


2 pieces single covered, manhole resistant to test pressure.

1 piece air pressure monometer.

Imported hose system having internal discharging channel that provides fluidity.

1 piece safety valve adjusted to 2.5 bar.

1 piece ball jet air valve that accelerates discharging.

1 piece tool kit box (at the body).

1 piece nonskid ground walking platform.

1 piece stair from rear existing.

2 pieces PVC carrier for discharging hoses.

Plastic mudguard covering rear axle Group.

1 piece tool kit box made of sheet.

1 piece discharge valve box made of sheet.

Control Panel (Check – pass, air meter, ramp lever).

Plastic water tank.

Roller or basket spare tire carrier.

Chock and chock place.


                                                             .                .                              .

The above features are standards. The features can change according to customer’s request.